Headline Filters

Headline Filters is a UK manufacturer of bonded microfiber filter elements and associated filter housings. These filters are suitable for a variety of gas and liquid applications. There are a number of benefits, offering high flow rates with very low pressure drops. All products conform to industry standard sizes and grades and are completely interchangeable with other manufacturers housings and filter elements.

Technical Support Data

View pdf document:

Compressed Air and Gas

A well-designed coalescing filtration system will essentially remove all solid and liquid contamination, with minimum maintenance and operating costs. Headline coalescing filters remove 99.99% of solid and liquid particles and aerosols down to 0.1 micron, producing truly clean compressed air.

View pdf document:

Instrument Air, Coalescing, Particulate

Ultra-clean compressed air is most conveniently produced in the production plant by the installation of a well-designed Coalescing Filtration System. This system will remove essentially all solid and liquid contamination, with minimum maintenance and low operating costs. Headline Coalescing Filters remove up to 99.99% of solid and liquid particles down to 0.1 micron, producing truly clean compressed air.

View pdf document:

Natural Gas, High Pressure

High pressure compressed gas systems offer unique challenges to the removal of liquid and solid contaminates. The excessive pressure, and in many cases, high temperatures make coalescing difficult. Our housings overcome this challenge by having a small annular volume and bottom-based reservoir to reduce re-entrainment of liquids. Our stainless steel filter housings are rated up to 5000 psig, have captured viton o-rings, and have hex bowls for ease of service.

View pdf document:

Sample Process

Headline produces an extensive range of filters for instrumentation and analysis applications. We have solutions for in-line, particulate and coalescing, and bypass or fast loop. All housings offer high flow rates and fast response times.

Gas Analysis, Gaseous Sample

These Headline low cost/low pressure housings are constructed entirely from 316L stainless steel metal parts. Viton seals and a choice of stainless steel, Pyrex glass or acrylic bowl. The G & F versions are ideal for use in applications where it is necessary to monitor filter element conditions without interrupting the sample gas flow. The large capacity 147/148 Series of filter housings are recommended for those applications requiring extended service intervals or higher flow capacity.

View pdf document:

Liquid Sample, Analyzer Filters

Headline 110 & 120 Series Stainless Steel Filters are specified for the most demanding applications, where they function reliably under extremes of pressure, temperature and chemical environment. Constructed from 316L stainless steel, with a choice of either Viton or PTFE seal, these housings have excellent corrosion resistance and comply with NACE MR-01-75.

View pdf document:

Fast Loop

Headline fast loop filters are constructed entirely from 316L stainless steel. This straight through design is ideal for heavily contaminated systems, since the filter element is continuously flushed by the high flow rate stream. Only the low flow (analyzer) stream is filtered, thus maximizing filter element life.

View pdf document:

Natural Gas, High Pressure

High pressure compressed gas systems offer unique challenges to the removal of liquid and solid contaminates. The excessive pressure, and in many cases, high temperatures make coalescing difficult. Our housings overcome this challenge by having a small annular volume and bottom-based reservoir to reduce re-entrainment of liquids. Our stainless steel filter housings are rated up to 5000 psig, have captured viton o-rings, and have hex bowls for ease of service.

View pdf document:

Disposable (DIF)

The Headline range of Disposable In-Line Filters (DIFs) consists of permanently welded housings with encapsulated microfiber filter elements, making them ideal for portable flue gas analyzers, and other analysis systems requiring a durable and easily-replaceable filter.

View pdf document:

Liquid Filters

Our liquid "Free Flow" filter housings are ideal for a variety of liquid purification solutions. The Free Flow housings are available in stainless steel (SS), cast iron (C), or brass with a 304 stainless steel bowl (B). Port sizes range from 1/4" NPT up to 1 1/2" NPT and 2" NPT.

View pdf document:

Filter Elements

Principal Headline Filters Benefits:

  • Complete removal of submicron solid and liquid contaminates
  • Economical fully disposable bonded microfibre elements
  • Reliable filtration of corrosive of highly absorbent gases
  • High flow rates, low pressure drops
  • Suitable for gas and liquid applications

View pdf document:

© ESG Filtration     |     Terms & Conditions

Website Design by Primal Tribe